Alingment (4 wheel)

[knightrider]

If anyone needs an alignment done on their C6 vette I got mine done at NTB ,the one by I-10 and Fry road ,the Tech named Anthony and the Rep Ryan were of good help.Anthony actually worked on vettes before,he knows a lot about them ,and did a wonderful job on mine.He provided me with a detailed explanation ,worked very nice and clean on my ride(he was not messy at all) and did a wonderful job .As a matter of fact,one of them has a nice 2005 red C6 .I would definitely recommend them .They can be reached at 281-578-0900
:headbang:

[Tims02]

Thanks Walter!! Always a good thing to know for vette owners!

[knightrider]

:dblthumb2::SmokingTires:

[RyanJM]

Hey I have a Trans Am not a Vette and all I can say if your vette is a weekend car stay away from that NTB. I had them rotate my tires and align them. Let's just say 1 month and a bout 200 or 300 miles lter my car was shaking a bit.My front tires had 4 lug nuts left on one and 2 on the other. Also they lost 3 of my original lugs and only gave me one ket on I had to tighten one bolt one each wheel and when I called the manager said since it was more that 30 days it was tought ****. I stopped at NTD on HYW 6 next to auto zone. They put all new studs(some were missing on the front) onthe both front some rear that looked like they were damaged since those lugs were also loose. Cost them over $200 in free labor and parts just on the front. They had to get more studs to do the rear 2 days late. I figred I'd be nice and buy a new set of lug nuts myself since they fixed it with no argument and told me that guy at the NTB on Fry didn't knowwhat he was talking about. Hes said it was over 30 daysbut the mileage was so low he said it should have never happenen. Then they took me into the garage to have me watch the guy with the torque rench tighten every lug nut to spec. Not just a blast with a impact gun. The alignment guy there is also better. The got my car closer to spec that Fry, when I showed him the old sheet he said the guy was probably rushing jsu to get it done good enought. Hwy 6 even straigned my wheel to go with the tires. Only proble when I went in for a recent alignment is I banged the cower a arm and they had to adjust it a little different to due to the problem, so soon as the new UMI upper and lowers come in I will have Terry at vettTech do the instal and take it ti HWY 6 for the alightment. There staff is better and actually know what a toque wrench is used for. Just my 2 cents if you want a good NTB. Only NTB I'll go to.

[mikes_81]

are they knowledgable with older vettes? also, has anyone used "franks vettes" on louetta? its very close to me and i need expertise on some things about this car.